气象站顶部支架

Weatherstation Mount

2024-01-14 05:56:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a simple mount for a temperature / humidity meter found online. I 3d scanned the part and made a case so the fit is pretty spot on.

I designed it angled at 45deg which is perfect for viewing on a desk or in a printer enclosure. The entire thing prints without supports.

There are two versions of this, one with a straight open back which requires a long bridge, or the one with a rounded back where bridging is reduced as much as possible. I've had great luck printing both designs so pick whichever you like.

This is the thermometer / humidity sensor used in the pictures:

https://a.co/d/cT6mZmv

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
Any
Infill:
Any
Notes:
Prints well at any layer height, more infill means more weight in the base but its pretty stable since the CG is over the base anyway.

License

CC BY-NC-SA

Weatherstation Mount
by stevesgoodprints is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

气象站顶部支架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

Philips 马拉松 FC9225 轮子飞利浦 Marathon FC9225 轮子
2024-03-31
Arduino或5V继电器控制板固定架
2024-04-02
FFBeast仿真飞行器模拟轮部件
2024-04-19
王国之泪TOTK光龙塞尔达传说
2024-04-20
螺旋锥形手玩具（全新）
2024-05-08

最新模型