微管架 (18毫米)

Microtube Rack (18mm)

2024-04-12 12:45:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Methodologies such as Polymerase Chain Reaction (PCR) can require sampling from many standard sized microtubes to a commonly used 96-well or 384-well format. Many downstream methodologies align with this 96 well format, yet the default tube holder arrangement for Eppendorf tubes does not allow for multichannel usage. This can lead to tedious and error prone workflows when there are many tubes that require sampling.

This is a tube rack that allows for multichannel sampling of tubes into a 96 well format. Staggering tips on a multichannel allows for sampling from adjacent Ependorfs into every-other 96-well tube, or every 4, 384-well tubes. Zig-zag organization schemes of samples and various other strategies allow for a wide variety of applications with an increased throughput while also providing additional redundancies for common errors such as skipping or repeating samples.

Print Settings

Printer brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
No
Resolution:
0.12mm
Infill:
80-100
Filament brand:
eSun?
Filament color:
Black
Filament material:
PETG
Notes:
This STL is one file removed from the final version and does have the conical bottoms. (will update when able)

Printed face down on mirror surface with minimal padding and 60C heat bed.

Note: The mirror ended up being a single use item as some shards of glass came free with the build, but were able to get cleaned off with some care. The shiny result was worth the effort.

Post-Printing

I had to clean shards of mirror off the tube face, but aside from that. no sanding or removal of supports were required with the final version of this print.