LSI 9207-8i / 9217-8i 风扇支架（适用于经济型风扇，友好FDM设计）
Fan bracket for LSI 9207-8i / 9217-8i (for cheap fans, fdm friendly)
2024-01-14 08:20:48
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
4 new variants :
1 lsi-fan-bracket-v4-Finished Bracket No holes in the pillars v2.stl - Only holes in the pillars removed, for a Noctua fan
2 lsi-fan-bracket-v4-Finished Bracket Noctua Raised pillar v1.stl - For a Noctua fan, holes in the pillars removed, one leg is raised since it was obstructing an m.2. ssd on my motherboard.
3 lsi-fan-bracket-v4-Finished Bracket For Cheap Fans v1.stl - Same as #1 but with dimensions optimized for cheap 1 dollar 40x40x10mm 12V fans off Aliexpress and the likes.
4 lsi-fan-bracket-v4-Finished Bracket Cheap fan Raised pillar v1.stl - Same as #2 but for cheap Aliexpress 40x40x10mm 12V fans.
Print Settings
- Printer brand:
Prusa
- Printer:
MINI+
- Rafts:No
- Supports:Yes
- Resolution:0.10
- Infill:20%
- Filament brand:
Any
- Filament material:
PETG
- Notes:
The heatsink can get burning hot so I would maybe avoid printing this with PLA. And print with 0.10 layer height for a good fit with the board.
Print settings that I've used in Prusa Slicer to make support removal easier and optimize print quality with PETG:Support material:
Overhang Threshold: 40%
Style: Snug
Pattern Spacing: 0.75
Top interface layers: 0 (off)
XY separation: 100%
Filament -> Cooling
Bridges fan speed: 100%
License
Fan bracket for LSI 9207-8i / 9217-8i (for cheap fans, fdm friendly)
by tannisroot is licensed under the GNU - GPL license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
猜你喜欢
联系我们
邮箱: 289047960@qq.com
最新模型
-
男法术师2024-05-08 -
24byj到NEMA17适配器2024-05-08 -
KSGER T12焊接站背板2024-05-08 -
莫洛托夫标记笔3D模型2024-05-06 -
线轴支架2024-05-06
最热下载
-
未识别十字架006A，可嵌入盒（v2）2023-03-26 -
飞行三维 Fly-π 与 Fly TFT V1款外壳 V1.02023-03-26 -
ZTE MU5001 上位电容器2024-01-10 -
Dado - 立方体模型2024-03-24 -
二十面体骰子模型2024-03-29