大师之剑护鞘（来自《塞尔达传说》）

Master Sword Scabbard from Legend of Zelda

2024-01-14 09:17:59

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

WORK IN PROGRESS. Only print if you want to help me test it. I will appreciate any help. This is a very large object that I do not have much experience with.

Almost finished prototype of a scabbard for my version of the Master Sword. The interior is sized for the blade with a 0.5mm tolerance. Should give enough wiggle room while still holding. I added a sleeve in the back of the top gold piece that can fit a standard 1.5" (38mm) belt. I hope that this will be work for anyone that wants to wear it.

The scabbard is model after the version seen in Twilight Princess. Mostly since there are very high resolution images of it available. I plan to add different gold piece designs once I am happy with this version. A skyward sword version and a shrunken child sized version are planned.

Printing:

This model is designed for multi color printing as an option. All parts are sliced so that they are solid color through to the center. This prevents excessive color changes when an entire layer only need to be one color.

Imports parts in groups based on their section (e.g. Top, Center). When the slicer prompts "Load these files as a single object with multiple parts?" press "Yes". This will keep the parts together. They can be printed as a single color and painted if you prefer. The slicer will slice them as a solid object instead.

Each section is glued together with a joiner piece. Each piece is a little different. Make sure they are put in the proper order and direction. The scabbard is slightly tapered and does get smaller the lower is goes.

Will update once I am happy with my print results.