低调型高清浴室角落架

Lower Profile HD Shower Corner Shelf

2024-01-14 11:12:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Needed a minimal shelf for my upstairs bathroom shower.
Big props to the OP for this sweet design. I made the front lower and the back taller.
These are just big enough to not get in the way but will hold a couple medium bottles or one big bottle comfortably.
the back is 60 mm high to accomodate TWO strips of 30mm "nano ( -___- ) tape".
I used this junk https://a.co/d/eaS2krl
works well IF YOU
a. clean both surfaces with alcohol
b. install tape on SHELF FIRST
c. peel both layers on one side of shelf
d. peel about halfway on the other side of shelf and crease the backing to create a tab
e. push shelf against shower wall and touch the side with the backing still on it and SLIDE to opposite corner while pushing TIGHT against the remaining backing
f. press and wiggle firmly to seat the fully exposed side
g. peel tabs on opposite side away, and
h press and wiggle firmly to seat theA remaining side

i chose this tape because its very flexible and will make up for abnormalities in the tile, plus it clear. also its waterproof. also it sticks great to PLA and PETG.

have a good one

低调型高清浴室角落架

朋友，你觉得上面这个模型，属于下面的哪个分类？