iPhone MagSafe 充电托盘：适用于 iPhone 13/14/15 系列（Pro/Plus/Max）

iPhone MagSafe Charging Tray: iPhone 13/14/15 (Pro/Plus/Max)

2024-01-14 12:52:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

iPhone MagSafe 充电托盘：适用于 iPhone 13/14/15 系列（Pro/Plus/Max）

Summary

This is a charging tray intended to be used with the MagSafe charger for the iPhone 13/14/15 regular/Pro/Plus/Pro Max models. I designed it to make it dead simple for the MagSafe puck to stick to the back of the iPhone and I made it large enough so it can be used with almost any case. You can just toss your phone onto the tray and the beveled edges help ensure the phone slides into place. The bottom of the tray has cut-outs for the cable in any direction: top, bottom, left or right so you can pick the best orientation for you. It can be a little tight getting the cable in there, but it will fit. There are also cut-outs for .5" rubber pads. I found some on Amazon that I linked below (or just search for .5" rubber pads).

Make sure to download the correct model for your phone. There is one for the 6.1" regular iPhone, the 6.1" iPhone Pro, and the 6.7" iPhone Pro Max and iPhone Plus (same model).

I recommend printing them with 100% infill, completely solid. This is to make the print as heavy as possible so the phone comes away from the charing puck as easily as possible.

I printed some for my wife and daughter who put little vinyl stickers in the camera cut-out. :)

Amazon Rubber .5" Pads Link:
https://a.co/d/iNpqe6r