TP-Link 小型架挂架

MiniRack TP-Link Mount

2024-01-14 14:33:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

MiniRack TP-Link Mount

This component is a modular part for use with the MiniRack Base.

Compatibility

This component will accomodate most wide-format TP-Link networking hardware. These units have dimensions of 158mm x 101mm x 25mm. To confirm fitment, check the Specifications area of the unit in question on TP-Link's product site.

The unit should have a fairly snug fit within the component slot and should be held in place quite firmly by friction alone.

Personally tested with:

TP-Link ER605
TP-Link TL-SG108E

Customization

MiniRack uploads include the source Fusion 360 design files. Dimensions have been meticulously parameterized to allow customization of rack dimensioning. Relevant parameters can be found in the User Parameters area of Fusion 360.

Dependencies

The hardware unit will require power which is typically supplied on the rear of the unit via a DC barrel power supply. The power line can be run out the back of the MiniRack to a nearby outlet. Alternatively, other MiniRack components are available to supply power to racked equipment.