Ikea Tjena盒子标签与手柄

Ikea Tjena box label&handle

2024-01-14 20:33:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The last generation of Ikea home storage small boxes, unless you spend a fortune, the basic ones are proper basic. They don't even have a dedicated space for a label… think of years ago when they would actually have a small metal window to slide in the labels.

But that's why we got 3D printers, right? So here we are, a simple addition for your Tjena boxes.
It slots right in that sad square window, you can give it twist with the colours you fancy for better results.

There's a plain version, and one with the inset for standard small printable labels.
On mine, I just used my vinyl cutter and put the letters on the plain face.

The hole works as a handle, better than pulling on the cardboard alone!

This needs to be printed with supports for the slot in across the body, I use a fairly sparse support with 2.5mm pattern spacing, and 0.2mm top/bottom Z distance and the removal is very easy.