Cricut Maker 滚筒更换
Cricut Maker Roller Replacement
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a roller replacement for faulty/broken Cricut Maker cutter. The original rubber-rollers become loose after some time and slide off from original position.
Tested it already with 2 Cricut plotters and improved the tightness to an optimum.
Use instructions from YouTube how to dismantle the Cricut plotter. Remember each step and which screw goes where.
Print Settings
- Printer brand:
Prusa
- Printer:
Prusa Clone
- Rafts:No
- Supports:No
- Infill:100%
- Filament brand:
TPU
- Filament material:
TPU
- Notes:
I used a temperature at about 210°C so the layers melt together quite well.
Heated the printing bed to 60°C.
Post-Printing
I used a heated nail to even the z-seam on the inner side.
If there is a z-seam on the outer side you should even it out with sanding paper or a hot metal (nail or knife).
Replacement procedure
Tags
License
Cricut Maker Roller Replacement
by host42 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
特斯拉 Mini 3 Pro 无线遥控自行车支架2023-03-26 -
复古风格闹钟架2023-03-26 -
Elegoo Phecda 十字光标激光模块与空气辅助管支架2024-04-06 -
Weiner狗卫生纸架2024-04-06 -
联想 ix4-300d NAS硬盘架 3D模型2024-05-04
最热下载
-
车身RC 1/10 全套2023-03-26 -
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
「春雷」弹壳弹出式泡沫飞镖发射器（进行中）2023-03-26 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
罗技K400键盘壁挂式支架2025-07-27 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
高跟鞋鞋架2025-07-17 -
一体打印行星齿轮2025-07-15