Cricut Pen Adapter - 手工艺师的金属标记工具

Cricut Pen Adapter - Crafter's square metallic marker

2024-04-04 07:56:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Based on the collet adapter by Jordan Truesdell. This fits a Crafter's Choice (typ at Dollar Tree) metallic marker or any marker with an 11mm diameter. Because the marker has a short shoulder the collet adapter could not be changed to work using Jordan's excellent instructions so I just made a 14mm gauge. Set the gauge on the collet and insert the marker so that the tip of the marker just reaches the top of the gauge. That will position the marker tip the requisite 33mm from the tool holder shoulder. Remove the gauge and place the adapter int eh tool holder (existing pen adapter needs to be removed)

NOTE: Because of variation in 3D prints I strongly suggest you first have the tip just a bit lower than the top of the gauge to avoid risk of damaging the marker tip. Make a test drawing and adjust as needed.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Infill:
20
Notes:
It does have a small surface area on the bed so additional bed adhesion may be necessary depending on your setup.