电源插座附带水平边缘架

Outlet Cover With Shelf Horizontal Lip

2024-01-15 00:12:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of a horizontal outlet cover with shelf that was a remix of a vertical outlet cover with shelf. In my remix, I've added a lip to the shelf to prevent things from falling off if clipped in passing. My outlet happens to be at waist height in a high traffic area and so the lip was necessary to prevent outrage in the future.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Filament brand:
Anycubic (Gray), Creality (White)
Filament color:
Gray & White
Filament material:
PLA
Notes:
Support Settings for Cura
- Generate Support: Checked
- Support Structure: Normal
- Support Placement: Everywhere
- Support Overhang Angle: 45.0 (Probably could've done something closer to 80-85)
- Support Horizontal Expansion: 0.8mm
Multi-Color Filament Settings for Cura

Go to Extensions > Post Processing > Modify G Code. From the "Post Processing Plugin" window that pops up, select Filament Change from the drop down menu. If option not listed below, leave unchecked:
- Enable: Checked
- Layer: 55
- Initial Retraction: 15.0mm
- Later Retraction Distance: 300.0mm
- X Position: 25.0mm
- Y Position: 150.00mm
- Z Position: 0.0mm
- Retract method: Marlin (M600 U)