Lian Li 011D Evo-RGB 双风扇排气适配器

Lian Li (011D Evo-RGB) : Dual Fan Exhaust Adapter

2024-01-15 00:12:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a bracket adapter to incorporate 2 (120mm) exhaust fans onto the rear mount of the Lian Li 011D Evo RGB. It's not actually designed to fit two fans like the O11 Vision, but this bracket can make it work if so inclined.

NOTE!!!
This print does require slight modification of the case. The two tabs seen in (Red Circle - TABS1) must be bent flat and the sealing panel removed to prevent obstructing the adapter. Just take a piece of tape and cover them (TABS2) so you don't mar the powder coat. Grab a pair of pliers and bend them flat (TABS FLAT). This will cause minimal scuffing and allow the bracket to fit; Shouldn't be terrible, it's very thin metal.

Once printed and assembled, it is a tight fit but the fans do work soundly in the space. Note further this will not work with a giant 420mm radiator up top, I used a 360mm rad and it fit snugly.

The bracket further encompasses 2 airflow channels to funnel excess air into the vented port area as to reduce turbulence created by the extra static pressure.

Is this needed? Absolutely not.
Is this extra AF? 100% yes.

Use at your own discretion.