独角兽头带

Unicorn headband

2024-01-15 01:54:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A simple design made for a child's carnival ball. It prints as one piece but requires support and due to a small adhesion surface it needs larger one.
The part under the unicorn's horn, tangent to the head, is quite rounded due to another element that was supposed to run through there. It can be cut off and aligned with the base of the unicorn's horn. Or reedited.
The back of the ears was also slightly smoothed with sandpaper.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
5%
Filament brand:
Creality CR
Filament color:
2 colours: Pink-Velvet
Filament material:
PLA
Notes:
210 C deg. / 65 C deg.
default speed

Scaled: 95% to match small head

Post-Printing

Final

"In the photo of the print, you can see the cut-off part (under which the braid originally ran). Overall, the shape and form were subject to the strict requirements of a young child.

How I Designed This

Solid Edge first try

Out of curiosity, I wanted to carry out a project in SE. Considering that I am new to this program and in sequential mode, there is a bit of a mess visible in the project. Maybe one day I'll sit down and correct this and that.