树莓派电源安装支架
Raspberry Pi PSU Mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This PSU Raspberry Mount is designed to fit the standard hole dimensions for Raspberry Pi 2B, 3B and 4B.
The design has an in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting. Will include 4 3mm offset spacers to be used between the controller and the mount to allow for the controller to be raised off of the mount surface.
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
4x - M2 - 12mm bolts/nuts (secure controller to mount)
4x - 3mm Spacers (provided by us)
Controller Information:
Standard Raspberry Pi 2B-4B
Meanwell LRS 350 - https://www.amazon.com/MEAN-WELL-LRS-350-12-Switching-Constant/dp/B07BH1FTYP/ref=sr_1_2_sspa
Meanwell LRS 600 - https://www.amazon.com/LRS-600-12-Switching-Upgrade-Version-SE-600-12/dp/B0BW2Q86XH/ref=sr_1_2
Tags
License
Raspberry Pi PSU Mount
by derikwhittaker is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
AeroPress咖啡豆磨碎器适配套件2023-03-26 -
2023年度EDC手镯饰品2023-05-10 -
热轮车汽车展示架，模块化设计，可连接安装2023-09-07 -
特斯拉Model Y（及Model 3？）座椅轨道末端盖2024-03-19 -
HWS用参数化偏移钥匙孔钩2024-04-13
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
30.5mm到25mm转换板（用于飞行控制器堆叠结构）2023-04-03 -
Gaggenau旋钮（Drehknopf）Part 50800068052023-09-10 -
拒绝的手势2024-04-19 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
丰田22RE发动机Starer电机2025-08-08 -
模块化笔筒链2025-07-19 -
鞋带锁2025-07-17 -
大码动漫女战士2025-07-15