树莓派 - 惠普电源安装架
Raspberry Pi - HP PSU Mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
his PSU Mount is designed to fit the standard hole dimensions for Raspberry Pi 2B-4B but to be mounted on an HP PSU via our HP PSU Straps (https://www.thingiverse.com/thing:5608721)
The design has an in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting. Will include 4 3mm offset spacers to be used between the controller and the mount to allow for the controller to be raised off of the mount surface.
You will want to download the HP PSU Mounts from https://www.thingiverse.com/thing:5608721
Mounting Hardware:
2x - M4 - 8mm bolts (secure mount to PSU)
4x - M2 - 12mm bolts/nuts (secure controller to mount)
4x - 3mm Spacers (provided by us)
Tags
License
Raspberry Pi - HP PSU Mount
by derikwhittaker is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
FPV 遥控坦克 V2.0 模型2023-03-26 -
最小型Tevo塔拉突拉机械臂30×30风扇安装架2023-05-01 -
拉特瑞吉 V核心 3.1版电机笼修剪模型2023-05-08 -
工艺机器人加强版工具架固定装置2024-03-31 -
多板结构胶带夹持器2024-04-30
最热下载
-
人耳道2023-03-26 -
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Delta设置校准为Klipper2023-04-23 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
FPV遥控纸飞机（机身）STL 3D模型2025-09-16 -
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
罗技K400键盘壁挂式支架2025-07-27 -
用于HGX Lite的MBOT3D MK2混音版2025-07-18 -
系带3D凉鞋（儿童款）2025-07-16