树莓派5 - 极客派M.2 NVMe硬盘转PCIe扩展坞外壳

Raspberry Pi 5 - Geek Pi M.2 NVME drive to PCIe hat case

2024-04-20 06:28:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Bought a Raspberry Pi 5 along with the "active cooler" from Chicago Electronics Distributors and a "GeeekPi N04 M.2 NVMe to PCIe Adapter for Raspberry Pi 5, Support M.2 NVMe SSD 2230 2242 2260 2280" from Amazon. Needed a case, so viola. Enjoy!

Print Settings

Printer brand:
Prusa
Printer:
i3 MK4
Rafts:
No
Supports:
No
Resolution:
.2 mm
Infill:
15%
Filament brand:
SUNLU
Filament material:
PLA+
Notes:
Printed at .2mm (speed setting) and it prints in 3 hrs 37 min., and it still looks pretty good.

YOU NEED TO FLIP THE TOP HALF SO THAT THE TOP PRINTS ON THE BUILD PLATE.

Post-Printing

May need minor clean up.

Run your finger nail under the tiny snap clips that are on the top half of the case to make sure they are clean and without obstruction. You will need to insert the Raspberry Pi 5 into the bottom half first with the USB-C and micro HDMI ports angled down. Then carefully snap the Pi into place with a firm push at each corner. Then carefully snap the top of the case on. If you need to open up the case, I have found it easiest to turn a flat head screw diver in the gap on the back side that gives access to the GPIO pins.
.

How I Designed This

About the design process...

I run Ubuntu Linux on all my home computers. This limits my choices for CAD software so I have taught myself how to use FreeCAD since there is a native Linux version that seems to be getting more stable as time goes by.