带有D&D类别图标的磁性骰子盒和托盘3D模型

Dice and miniature box and tray with D&D class icons - magnetic

2024-01-15 03:20:24

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

抖音私信 @jobsfan

I liked the dice box and tray by veeech but wanted some customization for each of my players and the ability to store their mini with their dice.

I prefer the DnD class icons by Jime Mosqueda so I slapped them on the lids of my boxes.

Also I wanted the magnets to be embedded in my prints for aesthetical reasons.

If requested I might do the other classes, but I don't have too much time on my hands right now so I included an empty lid for your design.

I designed the Parts to work with my bambulab p1s. My workflow is as follows:

drag the Class_Lid file and the corresponding Class_Inlay file into bambu studio together and, when asked if you want to insert as a single part with multiple components, click yes
Set the print to 0.2mm layer height. The Inlay is 0.4mm thick so it's printed in two layers. Otherwise I found the underlaying black shines through.
Set the first layer print color order so that the lid's first layer color is printed before the inlay's. This helps with bed adhesion for the inlay. You find the setting under the little bolt icon next to the print bed in bambu lab
Set the outer wall count of the inlay to 1. This is purely for optics with my chosen golden silk PLA filament, because you can later make out the outline in reflecting light. Depending on your inlay filament color, you get some interesting effects from changing the bottom layer printing pattern.
Insert print pauses at the appropriate layers. With bambu slicer and 0.2mm layer height, those layers should be 44 for the base and 154 for the lids.
The parts are designed for 4 5x2mm round magnets. With the p1s's generic PLA settings the magnets were a perfect fit and required no glue, albeit a bit of force to push into the holes. You might want to use a metal scraper or other flat metal tool to push the magnets in evenly.