半露螺栓套工具

Semi Lug Nut Cover Tool

2024-01-15 05:00:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

51mm socket to remove or install plastic lug nut covers for semi/18-wheeler wheels. I tried the metal and plastic hex tubes and they fit the lug nut cover but were too wide and damaged the hub cover. I designed this to take them off without damaging the hub cover or the lug nut cover.

The drive fitment is a little tight, I widened it to 12.8mm and haven't had a chance to try the new fitment. If it is too tight I would use a lighter and warm the plastic and then shove the 1/2in drive into the socket for a tight fit.

1/2in drive, 51mm socket

I included the F360 file if you want to change it for whatever reason, socket drive or depth or width. First time using F360 so the design might not be perfect but it works. Post remixes

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
100
Notes:
I used a Raft with 10 walls and 100% infill. If you think you can do without either of those be my guest, I didn't want it to break and it's solid as a rock.