模块化电影盒子

Modular Movie Mylar Box

2024-01-15 05:43:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Considering the cost of lumber and the lack of models out there, I figured modeling and printing one of these movie mylar boxes would be way more cost effective. The box is built to fit 5x25in movie mylar signs with modularity in mind, meaning you can stack as many of these boxes on top of each other as you want and run electronics for lights through each of them. Each box with minimum supports uses just over 700g of filament, so expect to use about a spool per print.

You can either slice the parts individually, or use the pre-arranged box parts to print entire boxes. Boxes require six 10x40mm dowels and CA glue to fit together, so if you don't want to use the 3D printed dowels you can use wooden ones.

Work In Progress Goals: