3D模型：弹球推子板 Williams / Midway
Pinball Plunger Plate Williams / Midway
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
These parts compliment my Plunger bracket ( see: https://www.thingiverse.com/thing:6431118 ) and are remixed from my original design for a standard 32mm arcade launch button plate ( https://www.thingiverse.com/thing:5399049 )
2 versions are included here with 2 brand logos each:
Williams/Midway Plate Large Hole -
Installs over the recommended shooter rod assembly leaving the chrome escutcheon exposed. This allows you to remove the plunger assembly without having to take off the plate.
Williams / Midway Plate Small Hole -
Gets installed over the chrome escutcheon and looks more like an actual pinball shooter, but will have to be removed to disassemble the shooter rod.
Plunger / Shooter rod from Ali Express:
I think I paid $10-12 for this (with shipping) which was $10 less than identical parts on Amazon. Surprisingly, it's a really good quality shooter.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:Yes
- Resolution:0.12 - 0.20
- Infill:25%
- Filament brand:
inland
- Filament color:
ANY
- Filament material:
PLA
- Notes:
Print as shown, with supports on the small holed versions, to support the hollowed areas underneath. The Large Holed versions should print just fine without supports.
Tags
License
Pinball Plunger Plate Williams / Midway
by OldCrankyBmullz is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
最新模型
-
Gaggia压力计磁铁套装2024-05-08 -
Taco Bell国际象棋车装饰品2024-05-08 -
阿普丽亚油回收器3D模型2024-05-06 -
无蝇防虫网安装支架2024-05-06 -
笔记本电脑人体工学支架2024-05-06
最热下载
-
模块化抽屉 2.02023-03-26 -
Toyota 22RE发动机扩展套件2023-03-26 -
远投笼2024-04-06 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
泰坦电视核心升级2024-05-02