户外壁灯

Outdoor Wall Lamp

2024-01-15 08:08:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here is a design of a exterior wall light. Inside there are two supports to thread an E27 ceramic lamp holder (see pictures), and a passage for the wires.
The diffuser must be printed in clear filament, and does not need to be transparent.
Maximum Bulb diameter 74mm.
Two holes for attachment to the wall with 5.5mm of diameter and 64mm apart.
The rear face was made hollow, to allow its installation in rough or not perfectly flat walls.
The diffuser is available in two versions with 1.2mm of wall thickness, as well as 0.6mm. It was intended to be printed with a 0.6mm nozzle ( 2 walls or 1 wall ).
Diffuser diameter: 145mm.
To print take: ''Lamp Round'.stl' + (''Diffuser 0.6mm.stl'' or ''Difuser 1.2mm.stl'').