Oontz 角架式壁挂装置

Oontz Angle 3 Wall Mount

2024-01-15 08:22:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Wall mount your Oontz Angle 3 Bluetooth speaker with this bracket! It requires two #8 screws (or similar) into a pair of drywall anchors or whatever else you want to fasten this into.

The bottom is open to get a little bit more oomph of out the speaker.

Print Settings

Printer brand:
VoronDesign
Printer:
Voron2 300
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
15% or more
Filament brand:
Sunlu
Filament color:
Black
Filament material:
PLA
Notes:
I recommend printing the STL "upside down" for strength. Most printers should have no problem with bridging the two slots.

Otherwise, print it vertically with the screw holes on the bottom.