两段式拉链
2 Piece Zipper
2023-03-26 17:54:08
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
This is a 2 piece zipper that is easier to install on a bag that doesn't have an exposed end like on a jacket. Screw in from the back directly on the zipper and have fun!
I had the original pull tabs so I just paused the print before it closed off and just slotted in the pull tabs.
Hardware Required:nM2 8mm screw x2
If you don't have a pull tab or need one as my design doesn't include one, I suggest this one remixed by sotenck as a pull tabnhttps://www.thingiverse.com/thing:1849862
两段式拉链朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
![[带开关孔] 爬虫拉链使用纸条夹](https://www.3dsjs.cn/api/utils/resourcehub?time=1751364689&url=http%3A%2F%2Flocalhost%3A9898%2Fsandsjs%2Fimage%2Fc%2Fd%2Fcde8a58ba52e55c00f2c6573057293c2.webp&signature=0821cc3db85834fae3b6253cb894cb76)
联系我们
邮箱: 289047960@qq.com
最新模型
-
曼诺拉还是小物件？2024-05-08 -
魔幻蘑菇202024-05-06 -
口技演员假人头2024-05-06 -
Zyn/Chino容器罐2024-05-06 -
18650充电宝模型2024-05-06
最热下载
-
飞行三维 Fly-π 与 Fly TFT V1款外壳 V1.02023-03-26 -
可打印骰子塔2023-03-26 -
3D模型标题1：kp3s orca slicer2024-04-07
-
Ikea 米兹顿 插嵌2024-04-20
