K1 Max Riser激素效应

K1 Max Riser on Steroids

2024-01-15 10:18:40

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

K1 Max Riser on Steroids - Modular Overhead Filament Box with 4 roll capacity with F3D for easy mods

I wanted the filament to share the same Cabin space as the printer, to maintain the same temperature and humidity.

I wanted the filament to share the same Cabin space as the printer, to maintain the same temperature and humidity since I found that it improves printing with certain materials.

Also, it helps the filament move much better than from behind the printer.

I do plan on replacing the external Filament sensor with the one on the extruder, and that will make this even better and cleaner.

You will need 1 rod of some sort to hold the spool, and the hole that holds the rod, needs to be modified based on the rod you have available.

(I had an aluminum rod lying around)

The corners print better on the K1 Max, on one of their sides.

Regular support (Not Tree) works better on the K1 Max.

Very easy to remove the supports.

I used a small screwdriver along the grooves to get the support off.

The connectors print well standing up, and I added “mouse ears” to ensure they don't start warping, which can be easily snipped off with scissors.

Highly recommend PETG to ensure the chamber can withstand high temperatures of up to 65C.

to prevent warping, please DO NOT use any fan for most of the print, and use ONLY Model fan when doing supports and bridges.

I printed with Nozzle = 270C, and Bed = 70C.

With PETG I tend to reduce acceleration for supports, top and bottom all the way down to only 500mms^2, and I keep the speed as high as 250mms and everything prints perfectly.

To build the box as shown, you will need:

The Rod long enough to span from corner to corner of the printer
2 Corners with holes for the rod
2 Corners without holes
8 connectors which also has a groove to allow the foam board cutouts to squeeze in
You want to put 2 connectors between each pair of corners that will make the structure very strong, and also hold the foam boards
The connectors can also easily slide out, for easy access to the printer when required
2 Roll holders - more if you want to store more rolls in there. It should be possible to store 4 rolls in there, just like the Bambu Lab AMS (will have to figure out the material change part later… LOL).
Dollar store foam board works great! Just cut them into the right size to fit between the connectors and corners
And then I just screwed the filament sensor to 1 extra connector (BUT I do intend on replacing that with the Extruder sensor Mod)
Oh, and metal clips work great to keep the roll holders in place at any part of the rod