飞利浦·菲迪里奥 B5/12 电池容器

Philips Fidelio B5/12 Battery Holder

2024-01-16 05:28:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a replacement part for the battery case inside the detachable end speakers of the Philips Fidelio Soundbar B5/12. The batteries in these soundbars are known to swell up after some years. I had mine for 6 years before the batteries became so degraded that they did not last through an entire movie. The batteries are so swollen that it is hard to remove them from their original case, especially since they are fastened with some kind of double-sided tape, I did not dare to remove them.

The case is designed to accommodate potential swelling in the future, which is why the walls are thin. To keep the battery in place and prevent vibration, I added pieces of a 4mm thick rubber training band.

The replacement battery I used is: "CS-PFB500L" 7.4VDC 2500mAh.

Keep in mind that there might be regional differences or similar soundbars that might use different batteries than what I used.