电机启动电容器末端盖罩壳头

Motor Start Capacitor End Cap Lid Cover for 1 7/16" Diameter Dayton

2024-01-16 07:53:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Print with the top down (this 3D model only needs minimal supports for the bracket cutout), and the support will stick to a clean textured plate while the part itself will release cleanly every time.

These motor startup capacitor end caps are extremely overpriced online, so I designed this after the original capacitor in my Bunn G2 HD coffee grinder went bad and needed to be replaced. This only fits a 1 7/16" diameter capacitor (Dayton brand, the most common, but may fit other brands with same outer diameter and height).

Dayton motor start capacitors can be found at Grainger for cheaper than Amazon prices with free 1-day delivery to their stores, so if you have a Grainger local to you, check them before buying online. They DO NOT come with the end caps. Those are separate and can cost as much as $20, which is more than the capacitor itself in a lot of cases.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
Yes
Resolution:
High
Infill:
100%
Filament brand:
Bambu Lab
Filament color:
Doesn't matter
Filament material:
PETG
Notes:
Print with the top down (this 3D model only needs minimal supports for the bracket cutout), and the support will stick to a clean textured plate while the part itself will release cleanly every time.

These motor startup capacitor end caps are extremely overpriced online, so I designed this after the original capacitor in my Bunn G2 HD coffee grinder went bad and needed to be replaced. This only fits a 1 7/16" diameter capacitor (Dayton brand, the most common, but may fit other brands with same outer diameter and height).

Dayton motor start capacitors can be found at Grainger for cheaper than Amazon prices with free 1-day delivery to their stores, so if you have a Grainger local to you, check them before buying online. They DO NOT come with the end caps. Those are separate and can cost as much as $20, which is more than the capacitor itself in a lot of cases.