Flip Light Blocker

2024-01-16 08:08:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This model uses the awesome 270° hinges designed by guppyk, found here: https://www.thingiverse.com/thing:4783423

The purpose of this device is to be able to easily flip up and down a plate that blocks all light from a device with a clock or indicator light, like a TV or cable box. Useful for places like a bedroom, where the red or blue 'standby' light from a TV may grow bothersome at night. Rather than using stickers, this gives a solution that allows the device to be visible when you want to see it, and dark when you want it dark.

This model can be scaled up or down depending on your device, I have successfully printed this model in 3/4 scale (5.25" long) and the hinge is still plenty strong and works fine.
At 100% scale, it is designed to cover up the bright clock and standby light on a cable TV DVR box. The cover plate itself is 7" x 2.25" (178x57mm) and the mounting plate is 7" x 1.7" (178x43mm). The mounting plate, marked "TOP", is mounted on top with two way tape, but you can mount it any way you want to.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
≥50%*
Filament brand:
eSUN
Filament color:
Black
Filament material:
PLA+
Notes:
(*) Hinges are listed on their own page that they require 50%+ infill. You could try reducing the infill to 10% and bumping up the number of walls from 2 to 3 to reduce filament usage while keeping the hinge strong enough. Either way, it prints in about 3.5 to 3.75hrs on an Ender 3 V3 SE.

Print using opaque filament, like black. I used orange once for a test piece (the 3/4 scale test) but it is translucent.