Cantilevered Vinyl Album Cover Stand

2024-01-16 09:36:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This Vinyl Album Cover Stand slides under the record player in order to hold the record cover off the edge of the table.

I wanted a now playing album cover stand to display what vinyl was spinning, however my record player table was too small to use a regular one.
so I made this one really quick to be able to hold the cover partially off the table.
its a pretty specific problem but hopefully it helps someone.

idea:
The idea is to get the long arm on the bottom of the stand snuggly under the record player without lifting the record player of course. This way the tension keeps the stand sturdy enough to hold the album cover.

The arm is 3 mm tall since that was the approximate space under my record player, the thickness can be adjusted though for different record players. I also used a little tape to make the fit even tighter.

problems:
I plan on working on this a bit more but here are some of the initial problems.
I didn't make the bottom wide enough so heavier covers make it lean back if its not pretty snug under the record player. I want to widen the base in hopes of eliminating this.
it takes about 3.5 hours to print on my ender 3 pro which id like to cut down.