Emporia Vue支撑板与盒盖

Emporia Vue Mount Plate & Box Cover

2024-01-16 12:15:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I didn't like how the Vue was clogging up my already pretty full panel, so I moved its wires into another box, fished them through a 1" conduit (ground and power wires go through standard armored BX separately; see photos.), so I designed these files to make the install a little more palatable.

There are two files here. First is vue.stl. This file is the actual mount for an Emporia Vue 2. It has small countersunk screwholes, and retainers for the clips. This can be used independently to mount your Vue anywhere/however you like.

The second file, vue_plate.stl is a plate I designed specifically for mounting the vue to a second pull box I installed off of my panel. See the images to see what I did.

The box I used (which is cUL/CSA listed) is:

USA: https://www.amazon.com/BUD-Industries-JB-3956-KO-Junction-Knockout/dp/B005UP9M3G/
Canada: https://www.amazon.ca/dp/B005UP9M3G

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V2 Neo
Rafts:
No
Supports:
No
Notes:
Pretty easily printed since they're both flat boxes. I didn't use any supports on anything anywhere as they're not needed, and they'll happily just print flat. Infill to your liking; they won't undergo a tonne of force beyond however tightly you bolt them together.

Designed in OpenSCAD. I'd be happy to dig out the files if asked.