速记仪 Speedmarker 标记仪
Streichmaß "Speedmarker" Marker gauge
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Speedmarker 1.0
Marking gauge for 300 x 30 x 1 mm steel ruler
First Version of a DIY marking gauge "Speedarker" to simplify/ speed up markings in the workshop. It has two sides with 45° angel and one 90° angle for markings.
I use a cheap steel ruler from Amazon with the dimensions 300 x 30 x 1 mm and printed the two parts.
Best to print in standing position and the main part incl. support.
Things you need:
- printed parts
- steel ruler 300 x 30 x 1 mm (shorter is possible as well)
- Screw M5x20mm
- Nut M5
Amazon Link:
https://amzn.eu/d/6aT3iXU
Change History
16.01.2024: First Upload
Print Settings
- Printer brand:
Anycubic
- Printer:
i3 Mega S/Pro
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:20%
- Filament brand:
Any
- Filament color:
black
- Filament material:
PLA/PETG/other
Tags
License
Streichmaß "Speedmarker" Marker gauge
by Martin7187 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
联系我们
热门推荐
-
Delta设置校准为Klipper2023-04-23 -
Neutrik SCDR防护罩/外壳2023-08-25 -
IKEA Skadis 支持 8 端桌面 USB 充电站2024-03-19 -
统一制 PA6 NPL-Z-03 13.62024-03-29 -
拒绝的手势2024-04-19
最热下载
-
螺旋齿轮玩具3D模型2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Delta设置校准为Klipper2023-04-23
-
拒绝的手势2024-04-19
-
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02
最新模型
-
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
女式凉鞋2025-07-16 -
天使和恶魔2025-07-16 -
巴黎卢浮宫的三圣母像2025-07-16 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24