1989 Camaro车门手柄套件3D模型

1989 Camaro Door Handle Cover

2024-01-16 21:43:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Button for the inside door handle of a 1989 Camaro. This is the cover that goes over the upper torx screw in the handle near the lock/unlock button. Works for driver as well as passenger side. It is held in place with friction, so you may need to increase the size slightly depending on how worn the recess is.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V3 SE
Rafts:
Yes
Supports:
No
Resolution:
0.2mm
Infill:
20
Filament brand:
Overture
Filament color:
Gray
Filament material:
ABS
Notes:
Infill could be less, but at 20% it prints in under 10 minutes. I used ABS, but ASA or PP would work equally as well. PETG would also work, though I'm not certain how well it would hold up in extreme temps.

I printed on a raft just to ensure adhesion, but with such a small part it probably isn't necessary.

How I Designed This

I measured the inner diameter, outer diameter and depth with calipers and designed it accordingly in Shapr3D on an iPad Pro. My initial test print was a little small so I increased the diameter by 0.7mm so that it would be a snug fit. The inner recess could be increased in size so that it fits over the head of the torx screw for increased grip, but didn't appear necessary for my needs.

Feel free to remix/adjust however you need. It's a simple part, but it was easier than trying to track down the part online - not to mention a heck of a lot cheaper.