UV-A灯台

UV-A Lamp Table

2024-01-17 06:42:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

So I have a new Saturn 8K printer, and the Isopropanol Bath for this thing tops out at around 7 L of alcohol. That... Is a lot of dirty alcohol when you've been doing some printing.

So to get around this, I had pulled out a UV-A lamp from the before times when you didn't have dedicated curing stations, and printed up a "table" to mount the lamp in.

Mostly because dealing with the cured resin is a much less toxic event than the uncured resin. So a few hours printing, and viola, a easier way to recover multiple liters of alcohol to be used again and again.

Here's the amazon.com link for the lamp in question:

https://www.amazon.com/gp/product/B07CZD8S8H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

I've added the scad file in the event someone needs a 150 mm square stand for something that isn't this lamp.

Cheers!