MOAI Baofeng UV-9G支架 v1.00

MOAI Baofeng UV-9G Mount v1.00

2024-05-02 23:23:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Baofeng UV-9G GMRS handheld transceiver mount v1.00 - WORK IN PROGRESS

I am sharing early in this process as there is not much if anything out there for the UV-9G and I sure appreciate it when others share their work.

This is a work in progress towards a cupholder-secured radio mount/stand that eventually will have components for protecting/securing the SMA-to-Nconnector dongle wire used for external antennas/mag-mount antennas as well as a hand mic retainer or spot to clip.

Included files:

STL file for UV-9G-Grip-v1.00 of the mount/grip part that is more or less a test fit stage.
STL for the UV-9G-GeneralShapeDesign-v1.00 radio mock up I created to negative-create this mount in case you want to try to design your own.

I only ask if you do that remix/modify this or use either component in a new design that you also post/share as a remix so everyone can enjoy these and any improvements made.

So far tolerances are great. This stage has no clip or retainer to firmly secure the radio from sliding out the top, it's just tight tolerances and it's close enough to hold the radio in place upside down with some decent shakes to test the fit/grip. It's designed to utilize the belt clip post/knob on the top/rear of the radio (with the plastic clip part out of the way). This likely is not necessary and I imagine it would work well without that knob installed on the back.

Enjoy