星空启思

"Think Celestial!" Tie Clip, 65 mm (LDS)

2024-01-17 11:05:24

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Russell M. Nelson, president of The Church of Jesus Christ of Latter-day Saints, taught in his October 2023 General Conference talk titled "Think Celestial!" to, well, Think Celestial! I wanted to create a tie clip with this phrase on it, and thus this object was born. I printed out a few of them to give to some friends, and they look quite snazzy worn on ties.

I HIGHLY RECOMMEND USING 100% INFILL!

The size of tie clip I included should be able to clip onto most ties.

Painting the lettering, or going over it with a sharpie could look good. However, I've never tried it, so you're sadly on your own for that one. I have heard that acrylic paint pens could work good, so you can give those a shot!

This tie clip is 65 mm long, 9.68 mm thick (including lettering), and 8.5 mm tall. From what I've tried, it looks pretty good on a standard thickness tie. It might look a little bulky, but that's mainly for strength, and so that the 3D printer doesn't throw a fit trying to print it. It actually looks quite sleek, I don't mind the thickness at all. (I also included a vertically slimmer version of the file called "Slim 65 mm Think Celestial Tie Clip". It's about 5.6 mm tall, but it looks a lot slimmer.)

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.12 mm
Infill:
100 %
Filament brand:
Shouldn't matter
Filament color:
White (or whatever you prefer)
Filament material:
PLA
Notes:
The finer the resolution, the better. I haven't tried many, but I initially used 0.12 mm layer height and it turned out great. I would not print this with supports, as the lettering is small enough that at least my printer (Ender 3 Pro) was able to handle this without supports no problem.