Diy无线电广播套装

Diy FM radio Kit

2024-01-17 16:03:20

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a case for a diy FM radio Kit. ( A picture is attached below) You need to print 1 case, 1 cover, and 5 buttons. You also need 4 m2-6mm screws.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
Yes
Supports:
Doesn't Matter
Resolution:
0.2-0.12
Infill:
Any percent will work.
Filament brand:
Esun
Filament color:
Black
Filament material:
PLA+

Post-Printing

Installation

Take the 5 buttons and insert them into the case through the bottom. Take the radio and the battery box and carefully insert it into the case. It is easier with the batteries taken out of the holder. Be careful not to dislodge the buttons out of their holes. then take 4m2-6mm screws and screw the cover on.