风力涡轮机 INVELOX

Wind Turbine INVELOX

2023-06-26 07:03:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A wind turbine based on the published dimensions of 'Invelox' wind turbine.

Use 8mm bar for axle, ~2 x skater bearings, 1 x thrust bearing, 72 x neodymium magnets, M3 bolts. Look at Robert Murray-Smith's youtube/tinkercad/thingiverse for the details of the hardware since this is a highly remixed modification of his material.

The magnets on the outer and inner rings should have opposite polarity facing eachother (rotate the outer ring by 90° until you achieve this).

Don't expect too much wind capture from this design! I am limited by the size of my printer.
Obviously it would benefit from the funnel having a larger catchment (i.e. more funnels/bigger funnels). I got ~35vdc (wired to a rectifier) by blasting it with a room fan at close range, with 700 turns of 0.1mm guage wire.

So - print more, wire them in series, increase the wind capture and this could be an effective yet discrete way of generating electricity.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/41Awo3tQ4pG