白板与牙签板角夹具

Whiteboard and Pegboard Corner Bracket

2024-01-18 00:11:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a simple wall mounting solution for thin pieces of material. It was originally designed to mount this 4'x8' whiteboard from Home Depot.

I have modified the design to work with 1/8" (3.5mm), 1/4" (7mm), and 1/2" (13mm) thick material, although it has only been tested at 1/8" and it fits snuggly.

It also works with #6 and #8 screws to sit fully recessed in the inner section.

Simply mount the back piece to the wall snuggly (but do not over tighten as to not break through the mount) and then super glue the front cover on the lip to hide the screws.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
50%
Filament brand:
OVERTURE
Filament color:
Matte White
Filament material:
PLA
Notes:
I print with at least 50% infill laid flat to combat the need for supports and for best structural strength.

Tags

pegboard pegboard clip pegboard mount wallmount wallmounts Wall Hanger wall mount whiteboard

白板与牙签板角夹具

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

完整的BLTouch/3DTouch指南：针对CR-10/s、Ender 2和Ender 3打印机的自动床级调整（更新版）
2023-03-26
浴室排水器
2024-04-07
Dyson V6系列3D模型适配器站
2024-04-15
Enders 3版控制面板
2024-05-08
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪
2025-08-21

最新模型