莱卡眼科显微镜兼容适配器全身版本

Leica Ophthalmology Microscope compatible adaptors whole-body versions

2024-01-18 00:26:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A range of Leica Ophthalmology microscope compatible adapters has been developed to enhance ergonomics during surgical procedures. These adapters are specifically designed for use with microscopes that have "short" heads. To achieve a neutral positioning of the surgeon's head and neck, it is recommended to use tiltable binoculars in conjunction with these adapters. The adapters are available in various sizes, ranging from 5cm to 20cm at intervals.
To facilitate customization and testing, it is suggested that certain 3D parts be printed using a local 3D printing service. This allows surgeons to evaluate different sizes and select the most suitable adapter for their specific surgical environment. However, it is important to note that these 3D printed parts should not be used for extended periods as they may become fragile and pose risks to both patients and staff.
Once the ideal-sized adapter has been identified, it is advisable for surgeons to have the corresponding part manufactured in metal by a local locksmith, using aluminum as the preferred material. This ensures durability and long-term safety during usage.
It is worth mentioning that sizes ranging from 12.5cm to 20.0cm are exclusively intended for 3D printing. If the ideal size exceeds 10.0cm, it is recommended to utilize the segmented version of the Leica adapter for the creation of the metal part. This is to prevent excessive weight, which could potentially compromise the stability of the microscope's counterweight and hinder proper positioning of the microscope's head.
One downside of using these adapters is that they reduce the visual field by around 20 to 40%. However, this is not a major issue when it comes to anterior segment surgery, as it is relatively easy to adjust to.
The development of these adapters aims to assist surgeons in achieving improved ergonomics during their daily use of microscopes. It is important to note that these adapters are intended for non-commercial purposes only and do not infringe upon any copyrights held by microscope manufacturers.
Two types of files are provided for the adapters, with the "stl" extension intended for 3D part creation and the "stp" extension intended for the creation of metal parts.
I have tested and used these adapters in my surgeries in more than 3,000 cases and no other issues were observed. Enjoy, and take care of your health!