钢笔与工具架
PEN / TOOL RACK
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This pen / tool holder was remixed from Cubistand Pencil Pen Brush Holder Standby sdmc .
Be sure to check the Misc. Notes for my comments about the grid supports.
Print Settings
- Printer brand:
Snapmaker
- Printer:
Snapmaker 2 A250
- Rafts:No
- Supports:No
- Infill:yes
- Filament brand:
esun
- Filament color:
What ever you want
- Filament material:
PLA+
- Notes:
ATTENTION !!
I've sized the grid supports with a very slight taper, top & bottom for an interference fit in their sockets!! They also have one corner rounded of to fit the corners. They also can fit into any of the squares.
My advice is print top grid and base first, then ONE support to check fit. Scale the 4 supports up or down in very small amounts, to get a good fit..Scale ALL 4 equally !!! Or you can just go ahead a design your own.Every machine is different. Filaments brands are different. Ambient conditions are different. Heck, nozzle wear will make difference. You'd be lucky if you print one of these and the supports fit nice and snug, no sanding, re-scaling or gluing needed ! With that type of luck . . .go buy a lottery ticket !!! (humor, peeps, humor).
How I Designed This
Simple design
Just split the grids into sections, assembled them to fit on my build plate, merged & print
Tags
相关内容
联系我们
热门推荐
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
RC模漂移触摸球 - 小Z2024-01-11 -
1:16 Tog二代2024-04-15 -
HTC Vive控制器支架2024-05-03 -
HGX lite v2支架2025-07-18
最热下载
-
Valorant 杰特的姿态2023-03-26 -
螺旋齿轮玩具3D模型2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
「春雷」弹壳弹出式泡沫飞镖发射器（进行中）2023-03-26 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
一体打印活动关节熊猫和支架2025-07-25 -
弹弓HGX-FRAME V1A2025-07-18 -
3d打印的男人凉鞋2025-07-17 -
泡泡底拖鞋2025-07-17 -
高跟鞋鞋架2025-07-17