蓝色Yeti纳米耳机支架
Blue Yeti Nano Headphone Stand
2024-01-18 12:43:40
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a headphone stand which attaches to the base of a Blue Yeti Nano microphone. Some notes for how I was able to print it:
- Base piece: Print hole side down and add tree supports only on the overhanging "U" piece
- Top piece: put flat on print bed and use standard supports for the 2 pegs
- When assembling it, you will probably need to take the mic off of the stand to fit it properly. I added a small rubber band at this stage to help with wobbling but it should work either way!
Print Settings
- Printer brand:
Voxelab
- Printer:
Aquila X3
- Rafts:No
- Supports:Yes
How I Designed This
Designed using OnShape
License
CC BY-NC-SA
Blue Yeti Nano Headphone Stand
by lslotter is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Wolf Mask ('adult') - 无支撑2023-03-26 -
卡片存放盒2023-04-27 -
37毫米防御炮 18/36/37型2024-03-31 -
SCX10 II 6x6 差分盖 3D模型2024-04-07 -
SH型森林装备杯形适配器2024-04-20
最热下载
-
免费蜘蛛侠头像STL模型，适合3D打印2024-03-24 -
NA Miata车灯遮光条折叠机构顶盖2024-04-15 -
中指2025-05-17
最新模型
-
ABB电气箱门环2024-05-08 -
极简浇水壶2024-05-08 -
玫瑰花盆2024-05-06 -
Scirocco MK2 后排座椅夹2024-05-06 -
飞机EGT模型2024-05-06