Elegoo Neptune 4 Pro喷嘴清洁解决方案

Elegoo Neptune 4 Pro Nozzle Cleaning Solution

2024-01-18 22:25:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

As the Z-offset measurement on the Elegoo Neptune 4 Pro occurs very close to the print bed surface, contaminants on the nozzle can quickly lead to inaccuracies in the system-measured Z-offset. Any existing material residue causes the bed to be pressed down during the offset measurement, resulting in a higher measured distance. This, in turn, positions the nozzle too close to the bed. The severity of this effect is influenced by the hardness and quantity of the residue.

Since I don't want to forgo automated bed leveling (KAMP) before each print, I've devised an approach for an automated cleaning system.

All you need is a brush, the macro, and an adjustment in your Start-Print-Macro. Additionally, I've created a No-Go-Area (Polygon) for the Orca Slicer to avoid its usage.

I sourced the brush from Amazon (https://www.amazon.de/dp/B0CHNZ458F) and cut the brush head after 40mm from the handle. You can also use any reasonably fitting alternative brush. The parameterized Fusion360 model, a Step file, and the STL file are provided.

Installation:
Print the holder in a heat-resistant material (ABS, ASA, ...). Insert the brush into the holder. Attach the holder to the front left corner of the print bed. Copy the macro (macro.cfg) into your printer.cfg.

Add the following line to your Start-Macro after heating the bed and before bed leveling: CLEAN_NOZZLE EXTRUDER_TEMP={params.EXTRUDER_TEMP|default(200)|float} WIPES={10}. (Parameter WIPES: Number of cleaning movements (default = 10). Cleaning temperature = Extrusion temperature - 40°C.)

Optional: Add the following polygon under Printer Settings -> Excluded Print Bed Area in the Orca Slicer: 0x0,25x0,25x5,5x5,5x42,0x42.

Your N4P should now clean its nozzle before each bed leveling and hopefully deliver a correct Z-offset afterward.

Enjoy!