可调节灯具支架夹紧基座

Articulated Lamp Bracket / Clamp Base

2024-01-19 02:14:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I don't even really know what this lamp is supposed to be called. I've had this one for probably 20 years and have always had an almost an identical model since grade school. It's an articulated lamp and magnifying glass with a peg on the end of the shaft that fit's into a plastic base. That base then gets clamped down with a bracket and thumbscrew or screwed into place on a surface. Whatever it's called, my base broke a few months ago after years of service and I missed having it for projects. Thusly, I crafted another base from mere plastic wire.

The shaft is 13mm dia. the clamp is 6.25mm dia. The holes in the base are slightly bidder to allow for imperfections in the lamp and in my printer. I printed the one pictured at 0.20 layer height at 100mm/s on an Ender 3 with 75% infill. no supports necessary - the horizontal bores should print just fine.

hopefully, it's sturdy enough to hold the weight of the lamp. Seems to work well so far.