模块化1U架布装备（适用于UniFi USW-16-Light-PoE）
Modular 1U Rack Mount for UniFi USW-16-Lite-POE
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Rack mount for a UniFi USW-16-Lite-POE switch that integrates in the modular 1U rack mount system. Due to the width of the USW-16-Lite-POE, I had to merge the middle section of the modular 1U rack mount system into the switch mount and make it smaller. It is still usable to feed cables trough.
STEP and Fusion 360 f3d files are provided.
Print Settings
- Printer brand:
Bambulabs
- Printer:
Bambu X1C
- Rafts:No
- Supports:Yes
- Resolution:0.2 mm
- Infill:>=25%
- Filament brand:
DasFilament
- Filament color:
Black
- Filament material:
PLA
- Notes:
Use tree supports if available and print with face side down then only minimal support is needed (see 3mf file).
Post-Printing
To enclose the switch and add stability to the whole mount, the backplate is mounted with four M4x8mm screws. Combining it with other modules from the 1U rack mount system requires two M4 nuts and two M4x20mm or longer socket head cap screw (DIN 912) are used.
Tags
License
Modular 1U Rack Mount for UniFi USW-16-Lite-POE
by reibuehl is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
SNZB-04户外箱2024-03-20 -
Gridfinity SFP 模块托盘 3D 模型2024-03-20 -
4 CMBG - ASI（军事情报）小队 - ORBAT令牌2024-03-25 -
罗利玩具拖车侧板固定钩2024-04-08 -
动漫角色3D模型：带面具的Animegao Kigurumi v3.52024-04-30
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24 -
原神优菈2025-06-27
最新模型
-
HGX lite v2支架2025-07-18 -
鞋带锁2025-07-17 -
Yeezy Foam Runner Adidas运动鞋2025-07-16 -
巴黎卢浮宫的三圣母像2025-07-16 -
大码动漫女战士2025-07-15