Fokoos AI摄像头工具架

Fokoos AI Cam and Tool Holder

2024-01-19 03:28:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

the cam is mounted with an M3 nut and bolt through the lower hole on the carriage.
The tool holder is held in place with VHB acrylic tape with the red backing, i had wanted it to use the upper hole but realised i couldn't as the spanner and nozzle cleaner blocks access.

i havent printed the text version as i was unsure how the text would turn out.

i use the tutorial from randomnerdtutorials.com for the camera software link:
https://randomnerdtutorials.com/esp32-cam-video-streaming-face-recognition-arduino-ide/

but i turn down the camera frequency from 5000 to 100 (LED_LEDC_CHANNEL, 100, 8), as it makes a high pitch wine.
i change maximum brightness from 255 to 50 (#define CONFIG_LED_MAX_INTENSITY) as the flash gets a bit hot.
i have the led auto turn on at 25 brightness when it is streaming as i use a web server on my printer that accesses everything and saves me keep entering the cam ip when it gets dark (int led_duty = 25)

i use a £5 buck converter from 24v to 5v for the AI power, and mount it in a case with VHB tape, then run the positive and negative the same path the ribbon cable takes up the frame.

the wifi software i use is created by mischanti and recommend it to everyone, it is a game changer for fokoos wifi
https://mischianti.org/category/project/web-interface-beeprint-for-mks-wifi/

Hope you enjoy the creation