存储盒子（用于Omnifixo和Kaiweets/Fnirsi）

Storage box for Omnifixo and Kaiweets / Fnirsi

2024-01-19 04:27:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

存储盒子（用于Omnifixo和Kaiweets/Fnirsi）

存储盒子（用于Omnifixo和Kaiweets/Fnirsi）

Summary

A storage box for two clever electronics helper sets. The perfectly flexibe and useful Omnifixo third hand set with its magnetic fixing and an usb c powered soldering iron sold as Kaiweets KETS02 or Fnirsi HS-01.

A heartfelt thank you to the previous thingiverse contributors for the inspiring original designs.

The red pieces are for solder. But of course you can store small electronic components in the litte compartment instead.

Three embedded round magnets (4mm x 10mm long) hold the Omnifixo base plate in place. The same size goes into the red solder holder in the left corner so you can just lift it out with one of the magnetic Omnifixo feet.

Print Settings

Printer:
Qidi X-Plus
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
25
Notes:
Pause your print at 19,8mm (layer 99 with 0.2mm layer height) to insert the three magnets.

存储盒子（用于Omnifixo和Kaiweets/Fnirsi）

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

鸡蛋绘画机迷你（Eggbot衍生版）v1.1
2025-07-16
免费蜘蛛侠头像STL模型，适合3D打印
2024-03-24
Articulated Snake
2024-03-30
法兰尺寸测量工具（小）
2025-07-16
用于RRD通用型70182电机的mayrc maytech桅杆夹
2024-04-20

最新模型