30mm - 56mm 滤线卷盘支架适配器

30mm - 56mm Filament Spool Spacer Adapter

2024-01-19 05:26:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I made this in TinkerCad to fit the 30mm spindle on the Ender S1 Pro. It fits the 56-56mm hole in my Creality plastic spools and will probably fit others.

It's only 5mm thick but fits snuggly (for me) and I've ran several 13 hour prints without issue.
Using this has resulted in significantly better quality by reducing visible horizontal lines.

I printed in standard PLA in high quality (Cura) just to ensure it was true to size but I think it would be fine in normal. I think it works well (in that it's a snug fit but doesn't get totally stuck) because it's not a true circle but has sides (I haven't counted them, maybe 20?) and this was purely a side effect of the cylinder shape in TinkerCad not actually being round!
But once I noticed this in Cura when slicing, I realised it would actually be an advantage.
The holes save a bit of plastic and allow some slight flex.

You can make it taller in your slicer if you wish (I'm going to make a more cylinder shaped version) but it won't have 'wiggle room' the way this flat disc does so it might be a it tight.
Unfortunately you probably can't scale it to change the outer diameter in most slicers as the internal diameter will change.

EDIT - I'm finished the cylinder version which I think is a better option than this if you change your spools more frequently. If you only change them when they run out though, this one works and is cheaper / quicker to print.