LAPTOP VERTICAL STAND WITH RUBBER PADS
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Hi!
I designed this model for my friend's macbook pro m1 pro, it fits well with laptops up to about 20mm in thickness.
I printed it with a resolution of 0.3, does not require supports,
approximately 38g of PLA are needed.
I have prepared an area to glue some rubber pads, both to avoid scratching the computer and to prevent it from slipping. I used the rubbers that are used for chair feet.
You can place the PC both vertically and horizontally.
It is very stable, resistant, easy and quick to print.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:No
- Resolution:0.3
- Infill:25
- Notes:
The stand printed in the photo:
Resolution: 0.3
Nozzle: 0.4
Sheel: 2 lines (I raccomanded 3)
Support: No
Infill: 25% or moreDimensions: 152,9 x 79,2 x 84
I spent 2 hours and 20 minutes printing and I used 38 grams of material with an ender 3 pro (150mm/s).
Tags
License
LAPTOP VERTICAL STAND WITH RUBBER PADS
by fffs96 is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
尖峰装饰附件2024-04-04 -
TBS源一V5 Matek M10Q 5883 Vifly GPS伴侣SMA安装座2024-04-11 -
CZ455 452 512 弹匣底板2024-04-22 -
Daisy小雏菊开花装饰2025-06-26 -
超清乌龟鱼缸2024-05-04
最热下载
-
螺旋齿轮玩具3D模型2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
奥迪康 Gun4IR 侧边按钮触发模块2023-05-23 -
拒绝的手势2024-04-19 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
鞋撑2025-07-17 -
女式凉鞋2025-07-16 -
私密羞羞娱乐骰子2025-07-15