Laptop Stand for slim laptops (with optional magnets)

2024-03-31 14:57:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Laptop Stand for slim laptops (with optional magnets)

Summary

Laptop stand that is:

Printable on a 220 x 220 bed.
There are openings for hands so the entire setup can be lifted.
Designed specifically to work with a low profile computer like a Macbook Air 13" and 15"
Compatible with other 13" 15" laptops where the base thickness is 8mm or less (see picture).
Optionally, you may use six 8mm x 2.5 mm magnets press fit into the parts so they link up when in storage.

This is a 3mf file with modifiers that become apparent after slicing (see picture). I first designed everything as a stl but found it can print in half the time if I use the honeycomb infill trick from CHEP on YouTube. All the work is done, just import the 3mf and print!

BOM: six 8mm x 2.5mm magnets