R36S经典游戏机手握配件

Hand Grip for R36S Retro Gaming Console

2024-01-19 11:47:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remixed Devongb's design to fit the R36S as i loved the grip feel in the hands and could not find a better designed grip for it that was available for free!

If you like the Xbox 360 controller feel you will love this!

I removed the USB bottom cut-out so no charging or headphone access while grip in use, found it more durable without the cut-outs.

I used a Self Adhesive Sticky Back Multipurpose Felt Sheet cut into 2.5 x 1.9 cm and stuck it to the inside of the grip for a snug fit. [1.75mm Felt thickness]

(You can find these sheets on amazon or ebay as furniture protectors, make sure the sheet is between 1.5 - 2mm and cut it to your desired size)

[1.5mm Felt thickness] looser fit
[1.75mm Felt thickness] medium fit
[2mm Felt thickness] tight fit <<<< For this i recommend PLA + / PETG as it can be pretty tight and can put excess pressure on the grip frame holding in the handheld