DE1组头模块
DE1 - Grouphead Modules
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
STLs to start making modules to attach onto the DE1 grouphead handle.
First one is a floating ice ball holder.
It fits 2.5in sieves like this one: https://a.co/d/fjRAD7F (cut a hole in it to stop the ball from rolling around)
With 2.2in steel ice balls: https://a.co/d/2G04zHr
Make sure you don't screw the mount on first (like a washer) or it won't fit in the gap. Take the handle off, take off the stock washer, insert it around the handle mount on the grouphead, then screw the handle into both at once
Print the Mount at 100% infill, the rest is up to you, though make sure you print it in PETG or ABS, PLA won't be strong enough to hold up the steel ball!
Tags
License
DE1 - Grouphead Modules
by noyZ is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
三星 Gear 无线充电器和手机的立架模型2023-05-01 -
花盆幼苗起始套装 60毫米2024-01-13 -
3D聚乙烯贴纸2024-04-05 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
带螺丝孔的电缆保护套2024-05-01
最热下载
-
人耳道2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
篝火（Bonfire）收纳盒 / 插槽整理架（含扩展包）2024-04-12 -
GLOCK 17型手枪2024-05-03
最新模型
-
任意立方体活动关节的一体打印外星人2025-07-19 -
3d打印的男人凉鞋2025-07-17 -
鞋带锁2025-07-17 -
Yeezy Foam Runner Adidas运动鞋2025-07-16 -
比基尼模型2025-07-16